Skip to content
HVACFINDHVACFIND
All prices
Technician fitting PVC vent pipe to a new high-efficiency gas furnace in a basement

Furnace replacement cost in the US

the USModel estimateLocal wages, prices and climateUpdated each quarter

What it costs in the US

Furnace replacement in the US typically costs $5,400 for a 1,500–2,500 sq ft home. Most jobs land between $3,700 and $7,950. This is a model estimate from public wage, price and climate data; local prices sharpen it as people add theirs.

Typical price
$5,400
Most jobs
$3,700–$7,950
Home size assumed
1,500–2,500 sq ft
Price source
Model estimate

What's in the price

How the typical price splits, at local wages and prices. A real quote should show the same parts.

  • Equipment · $3,932

    73% of the typical price. Gas furnace. Mid-range brand at the regional minimum efficiency.

  • Labor · $1,081

    20% of the typical price. Disconnect and remove old furnace; Set furnace, connect gas, venting, plenum transitions, wiring, start up. At local HVAC wages.

  • Permit · $186

    The local mechanical permit and inspection, pulled by the contractor.

  • Haul-away · $202

    Removing the old equipment and recovering its refrigerant, as the law requires.

Read the quote line by line

A complete quote lists everything on the left. The right-hand column is what is often left off and billed later.

Should be on the quote

  • Gas furnace
  • Disconnect and remove old furnace
  • Set furnace, connect gas, venting, plenum transitions, wiring, start up
  • Remove and haul away old furnace
  • Permit and inspection
  • Brand and model numbers
  • Labor warranty in writing

Often extra

  • Venting conversion 80% -> 95%+ (PVC intake/exhaust, condensate drain)
  • Condensate pump (condensing furnace, no floor drain)
  • Gas line extension or replacement
  • New smart thermostat (unit)
  • Electrical panel or wiring upgrades
  • Ductwork repairs

Before you sign

Six things to check before you sign

  • Ask for model numbers

    The outdoor and indoor model numbers let you check efficiency, warranty and compare quotes line for line.

  • Repair or replace

    On systems over 12–15 years old, compare the repair against a replacement before you pay for a major part.

  • Permit

    Most places require a mechanical permit for a replacement. Ask whether it is on the quote.

  • Check the license

    Look the contractor up in the state registry before you sign. Our quote check does it for supported states.

  • Rebates

    The federal 25C tax credit ended for systems installed after 2025. Utility and state programs may still apply.

  • Timing

    Replacements are cheapest to book in spring and fall, before the first heat wave or cold snap.

Price it for your home

Home size

Typical installed price for this home in the US

$5,400

  • Equipment

    Mid-range brand

    $3,932

  • Labor

    Local HVAC wages, BLS

    $1,081

  • Permit

    Typical local fee

    $186

  • Haul-away

    Old equipment and refrigerant recovery

    $202

Check my quote

An estimate from public wage, price and climate data, not a quote. Energy figures use local rates and weather normals.

Price financed

$5,400

Price financed

Every month

$90

Interest rate (APR)9.99%
Term84 months

If you finance it

What furnace replacement costs a month

Many HVAC quotes lead with a monthly payment. Put the quoted price, rate and term here to see what the loan adds, before you compare it with paying another way.

$2,128

in interest over 84 months, on top of the $5,400 price.

A 0% promotion over 18 months would be $300 a month. Many promotions charge all the deferred interest if a balance is left when the promotion ends, so check the terms. Standard amortized loan, no fees included.

Check a financed quote

Compare

Cheapest, middle and dearest state

Every state
  • Furnace replacement

    LouisianaModel estimate

    • 3-ton home
    • 1–2 days
    • Permit

    $3,450–$7,450 typical $5,050

  • Furnace replacement

    WashingtonModel estimate

    • 3-ton home
    • 1–2 days
    • Permit

    $3,850–$8,600 typical $5,750

  • Furnace replacement

    AlaskaModel estimate

    • 3-ton home
    • 1–2 days
    • Permit

    $5,750–$10,650 typical $7,850

Questions

Furnace replacement: what people ask in the US

Printed contractor quote on a table next to a phone and a pen
Checked on your deviceNothing is uploaded

HVACFIND Price Index 2026Q4.2

Updated every quarter

How much does furnace replacement cost in the US?

Typically $5,400 for a 1,500–2,500 sq ft home. Most jobs fall between $3,700 and $7,950. Smaller homes start near $5,200; larger ones run about $5,600.

Is my quote fair?

Quotes between $3,700 and $7,950 are in the normal range here. Paste or upload yours into the free quote check: it compares the total, flags missing items and checks the contractor's license, all on your device.

Where do these numbers come from?

National line-item costs adjusted by local HVAC wages (BLS), regional prices (BEA), climate (NOAA) and permit fees, then corrected with real local prices as people share them. The methodology page has the details.

Second opinion

Get one fair quote from a licensed local pro

Tell us the job and when suits you. We confirm by phone or text, then pass your request to one licensed contractor who covers your ZIP. Nobody else gets your number.

  • We confirm the job before anyone calls you
  • One contractor, never a bidding list
  • License checked with the state
  • Free for homeowners
What you need
Time of day

Free. One contractor, never a bidding list.

By submitting, you agree that HVACFIND and one partner contractor may contact you by phone, text or email about this request. Consent is not a condition of purchase.