Skip to content
HVACFIND
Technician checking a new heat pump outdoor unit with a refrigerant gauge manifold

Heat pump replacement cost in Minnesota

MinnesotaModel estimateLocal wages, prices and climateUpdated each quarter

What it costs in Minnesota

Heat pump replacement in Minnesota typically costs $12,100 for a 1,500–2,500 sq ft home. Most jobs land between $9,100 and $16,050. That is 24% above the US typical of $9,750, mainly because HVAC technicians here earn 25% more than the national median. This is a model estimate from public wage, price and climate data; local prices sharpen it as people add theirs.

Typical price
$12,100
Most jobs
$9,100–$16,050
Home size assumed
1,500–2,500 sq ft
Price source
Model estimate
HVAC tech wage
$36.71/hr
Climate zone
7, 6A
Cooling degree days
626
Minimum efficiency
14.3 SEER2 · 7.5 HSPF2
Permit
Depends on city
Time on the job
1–3 days

What's in the price

How the typical price splits, at local wages and prices. A real quote should show the same parts.

  • Equipment · $9,580

    79% of the typical price. Outdoor heat pump (A2L refrigerant); Matched air handler (all-electric system). Mid-range brand at the regional minimum efficiency.

  • Labor · $2,095

    17% of the typical price. Remove old outdoor unit and indoor unit, recover refrigerant; Set heat pump and air handler, braze, evacuate, charge, heat-strip and defrost controls, start up. At local HVAC wages.

  • Materials · $37

    0% of the typical price. Outdoor disconnect box (whip replaced with it).

  • Permit · $185

    The local mechanical permit and inspection, pulled by the contractor.

  • Haul-away · $202

    Removing the old equipment and recovering its refrigerant, as the law requires.

Read the quote line by line

A complete quote lists everything on the left. The right-hand column is what is often left off and billed later.

Should be on the quote

  • Outdoor heat pump (A2L refrigerant)
  • Matched air handler (all-electric system)
  • Remove old outdoor unit and indoor unit, recover refrigerant
  • Set heat pump and air handler, braze, evacuate, charge, heat-strip and defrost controls, start up
  • Outdoor disconnect box (whip replaced with it)
  • Recover refrigerant, remove and haul away old units
  • Permit and inspection

Often extra

  • Matched coil on existing furnace (dual-fuel alternative)
  • Refrigerant trim charge beyond factory pre-charge
  • Electric heat strips 5-10 kW (if not included with air handler)
  • Replace refrigerant line set
  • New pad or wall brackets
  • Condensate trap / float safety switch

Local factors

What moves the price in Minnesota

The same four facts on every place page, so two places read side by side compare the same rows.

Climate

Zone 7, 6A

Cooling degree days per year, 1991–2020 normals. More means longer AC runtime and wear.

626

Hot days

Days at 90°F or hotter

Including 0 days at 100°F or more, on average.

10

Electricity

State average

Residential rate. It sets what an efficient system saves you each year.

17.4¢

Permit

Depends on the city

The contractor pulls it and books the inspection.

—

Before you sign

Six things to check before you sign

  • Ask for model numbers

    The outdoor and indoor model numbers let you check efficiency, warranty and compare quotes line for line.

  • 14.3 SEER2 is the floor here

    New systems must meet the regional minimum. Higher ratings cost more up front and save on power every summer.

  • Permit

    Rules vary by city. Ask the contractor whether a permit applies.

  • Check the license

    Look the contractor up in the state registry before you sign. Our quote check does it for supported states.

  • Rebates

    The federal 25C tax credit ended for systems installed after 2025. Utility and state programs may still apply.

  • Timing

    Replacements are cheapest to book in spring and fall, before the first heat wave or cold snap.

Price it for your home

Home size
Efficiency15.2 SEER2

Typical installed price for this home in Minnesota

$12,445

  • Equipment

    At 15.2 SEER2

    $9,925

  • Labor

    Local HVAC wages, BLS

    $2,095

  • Materials

    Disconnect and small parts. A new line set, pad or extra refrigerant is quoted separately when needed

    $37

  • Permit

    Typical local fee

    $185

  • Haul-away

    Old equipment and refrigerant recovery

    $202

  • Cooling, per year

    $10 a year less than a 14.3 SEER2 system · pays back in about 35 years

    $155

Check my quote

An estimate from public wage, price and climate data, not a quote. Energy figures use local rates and weather normals.

Price financed

$12,100

Price financed

Every month

$201

Interest rate (APR)9.99%
Term84 months

If you finance it

What heat pump replacement costs a month

Many HVAC quotes lead with a monthly payment. Put the quoted price, rate and term here to see what the loan adds, before you compare it with paying another way.

$4,768

in interest over 84 months, on top of the $12,100 price.

A 0% promotion over 18 months would be $672 a month. Many promotions charge all the deferred interest if a balance is left when the promotion ends, so check the terms. Standard amortized loan, no fees included.

Check a financed quote

Compare

Heat pump replacement in Minnesota's metros

US average
  • Heat pump replacement

    Minneapolis, MNModel estimate

    • 3-ton home
    • 1–2 days
    • Permit

    $9,150–$16,200 typical $12,200

Questions

Heat pump replacement: what people ask in Minnesota

Printed contractor quote on a table next to a phone and a pen
Checked on your deviceNothing is uploaded

HVACFIND Price Index 2026Q4.2

Updated every quarter

How much does heat pump replacement cost in Minnesota?

Typically $12,100 for a 1,500–2,500 sq ft home. Most jobs fall between $9,100 and $16,050. Smaller homes start near $10,350; larger ones run about $14,000.

Is Minnesota more expensive than average?

The typical price here is 24% above the US typical of $9,750. Local wages and prices drive most of the difference.

Is my quote fair?

Quotes between $9,100 and $16,050 are in the normal range here. Paste or upload yours into the free quote check: it compares the total, flags missing items and checks the contractor's license, all on your device.

Where do these numbers come from?

National line-item costs adjusted by local HVAC wages (BLS), regional prices (BEA), climate (NOAA) and permit fees, then corrected with real local prices as people share them. The methodology page has the details.

Second opinion

Get one fair quote from a licensed local pro

Tell us the job and when suits you. We confirm by phone or text, then pass your request to one licensed contractor who covers your ZIP. Nobody else gets your number.

  • We confirm the job before anyone calls you
  • One contractor, never a bidding list
  • License checked with the state
  • Free for homeowners
What you need
Time of day

Free. One contractor, never a bidding list.

By submitting, you agree that HVACFIND and one partner contractor may contact you by phone, text or email about this request. Consent is not a condition of purchase.